Multi-fit chimney cowl
The dual purpose cowl can either be fitted as a pot hanging cowl or a suspension cowl
The liner is then cut 3 – 5 mm above the clamp, the neck of the cowl is then slid down the inside of the flue liner until it sits on top of the pot, then secure to the outside of the pot using the support straps and locking band.
Please ensure that a high temperature silicone or fire clay is used to seal between the neck of the cowl and the liner, this will ensure a gas tight seal this should be done at the time of inserting the neck of the cowl into the liner.
Please note: All installations should be carried out by a qualified engineer.
Have you got any questions?
If you have any questions or comments, please complete the form below and we will get back to you in the shortest time: